Follow these easy set-up steps:
PRESS Settings
PRESS Installation
PRESS Setup Wizard
Walk through steps press tick (top, right hand corner)
Control Type – Using arrows to select Floor
PRESS The Tick (top, right hand corner)
Sensor Type – Using arrows to select Devi 15k
PRESS The Tick (top, right hand corner)
Floor Coverings –Using arrows to select your floor coverings
PRESS The Tick (top, right hand corner)
Room Type – Using arrows to select your room type
PRESS The Tick (top, right hand corner)
Output – Please refer to installation schedule/Packing slip provided. Please also note that the wattage selected does not have any bearing on how controller works. It is simply to follow your usage please refer to Settings, Info, usage)
PRESS The Tick (top, right hand corner)
Timer – Select on if you wish to use programmed times, off if you wish to run controller in manual mode.
PRESS The Tick (top, right hand corner)
INSTALLATION COMPLETE!
A few other helpful tips!
Setting the TEMPERATURE:
These setting can be found in Timer/Temperatures.
The Devireg Touch will be automatically updated with the corresponding factory pre-set comfort temperature and economic once the floor covering and room type has been selected. If your floor falls below this temperature your heating will turn on outside of your programmed periods and heat up to this temperature.
We recommend that you turn the economic temperature down to 5 degrees to ensure your floor heating does not come on outside of your programmed periods.
Turning the thermostat controller ON and OFF:
To turn your controller OFF at the end of the season, simply feel along the outside of the right side of the screen. Towards the top you will feel a slight indent where the button is. PRESS the button in and four menu options will appear. Select Power OFF which is the last option on the screen.
To turn the controller ON simply touch the screen once for the ‘ON’ symbol to appear then touch the screen a second time to reactive the setting that were previously used.
Turning off the LOCK FEATURE:
To turn the LOCK FEATURE OFF, feel along the right side of the screen. Towards the top you will feel a slight indent where the button is pressed in and ‘SAFETY LOCK ENABLED, LOCK’ will appear.
PRESS the tick. PRESS MENU/SETTINGS/OPTIONS/SAFETY LOCK tap off, and then PRESS the tick. The SAFETY LOCK is now DISABLED.
Setting DATE & TIME:
Go back to the Main Screen, then PRESS MENU/TIME and DATE on the left hand bottom corner.
RELATED INFORMATION:
Devireg Touch Video: DTouch Video
Devireg Touch Programming Instructions: Programming Instructions
Please call us on 0408 32 61 68 or email us on info@tileheat.com.au if you have any further queries.
